27.09.2013, 05:34
0
dx1 schrieb:Sind die Rasps denn jetzt eigentlich auch tauglich für 1080p-Material in h.264? Und wisst Ihr was über meinen Anwendungsfall "DVD-Video-Backups mit 5.1 AAC"? Die olle Xbox macht mir daraus einen standardkonformen AC3-Stream, der über Coax an den Surrounddecoder geht und dort als Dolby Digital erkannt und dekodiert wird. Nur Dynamikkompression geht damit nicht mehr, aber wer braucht das schon?
Kann der Rasp Dolby Digital in Echtzeit kodieren?
Wenn du die Audiospur über HDMI an einen AV Reciever weitergibst sollte das kein Problem sein!
Zitat:- the Pi is not always fast enough to decode DTS or Dolby Digital 5.1 (AC3) to stereo on the fly, but it has no problems passing through these codecs over HDMI to a DTS or AC3 decoder/receiver. If you have an HDMI receiver (or TV) that allows these audio codecs, you will be fine (the work is done by the AVR decoder). If you dont have that hardware, there isnt too much point in using a DTS track, so if possible, you should select a stereo or AAC track instead. Most DTS/AC3 media will have such an audio track. If your source only has DTS audio, and you dont have a DTS capable receiver, you may have a problem.